- Auto King Gaff CS300
2017.11.25The Shaft of Auto King Gaff stuck. Tell me how to repair it.
Take the following procedure to accommodate the Auto King Gaff if it stuck.
1. Remove the End Plug.
2. Attach the bottom of the Gaff to a hard surface such as the ground.
3. Hold a part below the safety cover. Never hold the safety cover.
4. Throw the stuck node to strike the ground. Instantly release your hand from the node thrown.
5. The stuck node will come down.
Also refer to the following videos.
How to restore the stuck condition of the Auto King Gaff
Avoid the use of lubricant, such as CRC, as it will cause stronger sticking.