Daiichiseiko is an Osaka-based manufacturer of smart fishing items that are definitely not indispensable but anglers will certainly be able to enjoy them.

▼ Open Menu

Super Uketaro 130

A wide version of the Super Uketaro with an enlarged mounting width of 130 mm.
In pursuit of further ease of use with a lever to prevent the falling of line hooks and rods and an increased rod holder size.

The lever, which opens and closes, locks the rod butt and prevents the rod from falling off.
No worries during breaks and in strong winds.
The rod butt holder rotating 360° is available to right hanging and left hanging.

Possible to connect a spinning reel or compact bait reel.
Vertically or horizontally mounted with swing and angle adjustments freely.

Super Uketaro 130 (¥3,400(JPY))

A wide version of the Super Uketaro with an enlarged mounting width of 130 mm.
In pursuit of further ease of use with a lever to prevent the falling of line hooks and rods and an increased rod holder size.

The lever, which opens and closes, locks the rod butt and prevents the rod from falling off.
No worries during breaks and in strong winds.
The rod butt holder rotating 360° is available to right hanging and left hanging.

Possible to connect a spinning reel or compact bait reel.
Vertically or horizontally mounted with swing and angle adjustments freely.

SPEC
● Installation effective width: 15 to 130 mm
● Body: Amorphous resin
● Storage size: 220 × 115 × 55 mm
● Weight: 460 g
MADE IN JAPAN
Detail 1
The Super Uketaro 130 is dedicated to small rods for boat fishing.
(Short rods up to around No. 20 with suitable leader lines up to around No. 3)

Methods of angle adjustment and horizontal/vertical mounting installation change
To adjust the angle, loosen the red setscrew, adjust the rod holder to the desired position in the front, rear, left and right, and tighten the red setscrew.
To change the mounting direction vertically or horizontally, remove the red setscrew and replace both the rod holder and angle adjustment base (the round base at the bottom of the rod receiving part). Be careful not to drop parts when adjusting or changing.

Note
The photo shows the Uketaro with a mounting width of 85 mm.
Detail 2
Closing the lever locks the rod butt holder, thus preventing the falling of the fishing rod. The lever, which opens and closes, locks the rod butt holder, and prevents the rod from falling off. No worries during breaks and in strong winds.
The rod butt holder rotating 360° is available to right hanging and left hanging.

Mount the product to the L-shaped handle of the clamp screw and turn the clamp screw with fingertips so that the product can be attached to or detached from the boat side in a speedy manner.
Mounting example
Available for both small bait reel and spinning reel for short-distant casting.

Note
The photo shows the Uketaro with a mounting width of 85 mm.
3D view
Drag the mouse sideways on the image to rotate the image.
Drag the mouse sideways on the image to rotate the image.

スクロールはこちら
3D view
Drag the mouse sideways on the image to rotate the image.
Drag the mouse sideways on the image to rotate the image.

スクロールはこちら
Product No Product name Price
(excluding tax)
quantity To shopping cart parts
02021 Super Uketaro 130  ¥3,400(JPY)
  • 送料について
  • ・「代金引き換え」の場合、代引き手数料300円(税抜)がかかります。
  • ・3,000円(税抜)以上ご購入の場合、送料、代引き手数料が無料となります。
  • 詳しくはコチラ
We offer EMS and International e-packet for shipping.

Server too busy. Please try again later.