A hand-winding holder that will not damage lines.
A rotating system that will rotate the spool when winding the line on the reel with kinks automatically removed.
Eliminating frustration resulting from kinks and making the line last long.
OK to change lines on the fishing spot. Ideal for lures using thin lines.
Good for bait reels and easy to wind PE lines that are easily twisted.
Possible to fold the product compactly, and convenient for carrying the product to fishing spots.

SPEC

● Size: 342 × 160 × 25 mm (when in use); 185 × 152 × 25 mm (when folded)
● Weight: 165 g
● Spool maximum installation width: 30 mm; maximum diameter: 120 mm
MADE IN JAPAN

Winding method

1) Raise the folded arm and turn the arm fixing ring.
2) Pull out the fixing pin and rotate it 90° to secure the rotating holder.
3) Loosen the screw and pull out the tension collar.
4) Set the spool.
5) Insert the tension collar and lightly fix it with a screw. (Be sure to tighten it to the bottom of the screw)
6) Adjust the tension of the line by turning the entire tension collar.
7) Tie the line to the spool of the reel.
8) Pull out the fixing pin and rotate it 90° to free the rotating holder.
9) Set the arm part horizontal and move the adjustment balancer left and right so that the rotating holder will be well balanced.
10) The setting is completed at this stage. Wind at the same speed from beginning to end at once.

3D view

Drag the mouse sideways on the image to rotate the image.

Drag the mouse sideways on the image to rotate the image.

Video Clip

Server too busy. Please try again later.