第一精工は大阪市東成区にある「これがないと釣りができないわけではないがあればスマートな釣具」のメーカーです。

We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.

DX Support

Support mounting method
• Secure the support with the support screws to a position where the reel does not come in contact with the rod holder.
• Be sure to set the support so that the attachment/detachment lever will be on the front side. Mounting the lever on the opposite side will result in the falling of the rod.
• Tighten the left and right support screws evenly.
　Keep in mind that the plastic will be deformed if the left and right screws are tightened unevenly.
• The rod may break if the support screws are tightened in excess.

Notes on mounting support
• Press fit the support from above.
　Be sure to press fit the support securely until a crack sound is heard.

* Use the Hososaokei Adapter Set for thin rods.

DX Support　　¥2,600(JPY)

Support mounting method
• Secure the support with the support screws to a position where the reel does not come in contact with the rod holder.
• Be sure to set the support so that the attachment/detachment lever will be on the front side. Mounting the lever on the opposite side will result in the falling of the rod.
• Tighten the left and right support screws evenly.
　Keep in mind that the plastic will be deformed if the left and right screws are tightened unevenly.
• The rod may break if the support screws are tightened in excess.

Notes on mounting support
• Press fit the support from above.
　Be sure to press fit the support securely until a crack sound is heard.

* Use the Hososaokei Adapter Set for thin rods.

SPEC
● OK to mount a rod with a diameter of 23 to 32 mm.
● Size: 90 × 95 × 60 mm
● Weight: 185 g (including Hososaokei Adapter Set)
● Accessory: Hososaokei Adapter Set
MADE IN JAPAN
Size comparison and compatible models
● Models compatible with Chibi Support: Chibi Lark,Chibi Lark Long,Chibi Lark Super Long, Chibi Lark-type S,Chibi Lark long-type S, Lark900, and Chibi Lark GB
● Models compatible with Mini Support: Mini Lark, Mini Lark-type S, Light Lark, Free Lark, One-touch Lark Mini, and Lark 1700
● Models compatible with DX Support: High Lark16,High Lark18,High Lark16DX,High Lark18DX, Super Lark,Super Lark Long, Shakuri Lark, Shakuri Lark Long, One-touch Lark DX, Lark300, Lark1800, Lark2000, Lark2200, Lark2500, and Lark Piton
● Model compatible with Ultra Saikyo Support: Ultra Saikyo Lark 2
3D view
Drag the mouse sideways on the image to rotate the image.
Drag the mouse sideways on the image to rotate the image.

スクロールはこちら
We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.
Product No Product name Price
(excluding tax)		 quantity To shopping cart parts
09002 DX Support　 ¥2,600(JPY)
Add to cart
parts
the Mail Order Terms
  • 送料について
  • ・「代金引き換え」の場合、代引き手数料330円（税込）がかかります。
  • ・3,300円（税込）以上ご購入の場合、送料、代引き手数料が無料となります。
  • 詳しくはコチラ
Only EMS is available.

Server too busy. Please try again later.