第一精工は大阪市東成区にある「これがないと釣りができないわけではないがあればスマートな釣具」のメーカーです。

We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.

Lark 1700

A rod holder provided with a 180°, five-stage swing function dedicated to cruiser and motorboat fishing.
Dedicated to the fishing of medium and small fish (available to rod diameters of 15 to 25 mm)

Swinging left and right and jerking back and forth, and attached or detached with just a single action.
Use the product for a fishing boat where the clamp-type Lark Saouke cannot be mounted.
Possible to secure the rod holder provided with a 180°, five-stage swing function at five positions.
This makes it possible to change the direction flexibly to avoid entanglement in narrow places.

Lark 1700  ¥18,000(JPY)

A rod holder provided with a 180°, five-stage swing function dedicated to cruiser and motorboat fishing.
Dedicated to the fishing of medium and small fish (available to rod diameters of 15 to 25 mm)

Swinging left and right and jerking back and forth, and attached or detached with just a single action.
Use the product for a fishing boat where the clamp-type Lark Saouke cannot be mounted.
Possible to secure the rod holder provided with a 180°, five-stage swing function at five positions.
This makes it possible to change the direction flexibly to avoid entanglement in narrow places.

SPEC
ラーク竿受
●収納サイズ(ベース、ゴムパッキン除く):172x114x56mm
●重量:870g
ベース
●サイズ:58x68x29mm
●付属品:細竿径用アダプターSS・S・M、ドリル(径φ5mm)、タッピンネジ(φ6x30mm)4本、ゴムパッキン、ベース 、セットピン
MADE IN JAPAN
Lark Rod Holder Function List
Mounting method 1
1) Temporarily set the base of the Lark 1700 in the front side of the boat, and mark four mounting hole positions on the base with an appropriate tool, such as a pencil.
* Secure the base at the positions where the rod butt will not come in contact with the boat when standing the rod.
2) Open rough holes with the provided drill at the positions marked in 1), and secure the base with the tapping screws through rubber packing.
Mounting method 2
3) Press fit the rod holder fitting base onto the base while pulling the set pin.
4) Return the set pin for completion.
* Be sure to pull out the pin after use, remove and wash the rod holder, apply a little oil to the rod holder, and store the rod holder. Leaving the rod holder as it is will result in corrosion due to salt damage.
3D view
Drag the mouse sideways on the image to rotate the image.
Drag the mouse sideways on the image to rotate the image.

スクロールはこちら
Video clip
We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.
Product No Product name Price
(excluding tax)
quantity To shopping cart parts
01018 Lark 1700  ¥18,000(JPY)
  • 送料について
  • ・「代金引き換え」の場合、代引き手数料330円(税込)がかかります。
  • ・3,300円(税込)以上ご購入の場合、送料、代引き手数料が無料となります。
  • 詳しくはコチラ
Only EMS is available.

Server too busy. Please try again later.