It’s perfect for squid seeker metal and vertical contact horse mackerel lures.
A multi-purpose rod stand allows changeable styles (rod keeper and rod stand styles).
You can change the style by turning the pipe around.
Both styles are compatible with both spinning and bait tackle.

MULTI STAND　130　　¥5,200(JPY)

SPEC

Compatible rod diameter: Up to 36 mm
Clamp mounting width: 15 to 130 mm (vertical and horizontal mounting)
Rod angle: Eight levels of up/down and free swivel angle
Material: Glass-fiber reinforced plastic
Equipped with a line hook
Handle ring included
Weight: 588 g
Storage size: 255×135×74mm
MADE IN JAPAN

Rod keeper style

The rod can be held at an angle instead of vertically, which prevents the tangling of lures that have leaders, such as squid seeker metal and vertically controlled horse mackerel lures.

Rod stand style

It is useful when you change fishing points.
A locking function is available for a standing rod.

Equipped with a line hook

The product is equipped with a line hook to temporarily secure a line with a lure attached, preventing the rod tip from breaking unexpectedly.

Possibly Jerking

Can be Jerrking with the product

Mounted horizontally or vertically

It is possible to mount the product either horizontally or vertically to suit the shape and width of the boat’s edge. (Effective width for clamp mounting: 15-130 mm)

Angle adjustable

Rod angle: Eight levels of up/down and free swivel angle

Clamp compatibility

By ordering parts, It is possible to change to the clamp specification. Our product 「NO.26　Base Set（09076）」「NO.2　Set Screw（09056）」 of 「Lark900」 can be Base style, 「NO.30 Clamp Set（09058）」「NO.25 Handle Ring 5mm（09189）」「NO.27 Set Screw（09056）」of 「Chibi Lark Long」can be long clamp style(a mounting width of 90 to 160 mm).
(Chibi Lark Long's clamp is also possible to change the specification).

Each part of our product can be purchased in parts.
Please refer to the parts price list on our website.
Please refer to the parts price list from the "Parts" button at the bottom of each product detail page.

Please also refer to the link page below when ordering parts.
About buy a parts

* The set screws included with the Multi Stand 130 cannot be attached to the Lark clamp base. (Multi stand 130: M6 screw, Lark: M8 screw)
* The color of the "set screw (09056)" is red.
* The handle ring attached to the multi-stand 130 cannot be attached to the Lark clamp. (Multi stand 130: 4mm, Lark: 5mm)
*When attaching the Lark 900's Base to the boat’s edge for The Multi Stand 130, Make sure that the rod stand style is possible.
After that, Please attach the Base on right position.

Note

●The Multi-purpose Stand 130 is not a product that can completely secure the rod.
Be careful not to drop the rod unexpectedly. The warranty does not cover the rod or reel falling off.
●The load capacity of the rod holder depends on the mounting conditions of the clamp.
Do not attempt to mount the clamp on smooth surfaces.
●The clamp screw may loosen due to vibration. Occasionally check to make sure it is tightened.
●Do not support your body by holding the rod on the stand.
●Release the lock when changing from the rod stand style to rod keeper style. Applying force will cause damage.
●It may not be possible to mount the product depending on the shape of the boat’s edge.
●Be sure to wash the product with fresh water after use, drain off the water well, and store the product after lubricating.

3D view

Drag the mouse sideways on the image to rotate the image.

Drag the mouse sideways on the image to rotate the image.

Video Clip

Video Clip

FAQ

• I would like to know how to switch left and right of Multi Stand 130's Urea Screw
• Would you tell me more about the clamp compatibility of the Multistand 130?

Product No	Product name	Price (excluding tax)	quantity	To shopping cart	parts
02042	MULTI STAND　130	¥5,200(JPY)		Add to cart	parts

Server too busy. Please try again later.