第一精工は大阪市東成区にある「これがないと釣りができないわけではないがあればスマートな釣具」のメーカーです。

We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.

MULTI STAND 130

新商品NEW

最适合钓乌贼和竹荚鱼!!
可以改变样式的多功能支架。(钓竿角度保持支架、钓竿固定支架)
转动管子就可以改变样式。
无论哪种样式都有旋压、饵盘。

MULTI STAND 130  ¥5,200(JPY)

最适合钓乌贼和竹荚鱼!!
可以改变样式的多功能支架。(钓竿角度保持支架、钓竿固定支架)
转动管子就可以改变样式。
无论哪种样式都有旋压、饵盘。

SPEC
对应钓竿直径Φ36mm以下
夹钳安装有效宽度15~130mm(横竖安装)
钓竿角度:上下8段、摇头角度灵活自由。
材质:玻璃纤维强化塑料
搭载鱼线钩
附带方向盘
重量:588g
收纳尺寸:225mm×135mm×74mm
MADE IN JAPAN
钓竿角度保持支架
可以不垂直而是按一定角度固定钓竿,所以在钓乌贼和竹荚鱼等用到软铅时不容易缠线。
钓竿固定支架
移动地点等时很适合使用。
固定支架带有锁扣功能。
搭载钓线钩
搭载钓线钩,可以临时固定带诱饵的钓线
防止钓竿尾端突然折断。
Possibly Jerking
Can be Jerrking with the product
可以横竖安装
配合船沿的形状和宽度,竖向、横向都可以安装。(夹钳安装有效宽度15~130mm)
可调整角度
钓竿角度:上下8段、摆头角度:可以灵活调整。
Clamp compatibility
By ordering parts, It is possible to change to the clamp specification. Our product 「NO.26 Base Set(09076)」「NO.2 Set Screw(09056)」 of 「Lark900」 can be Base style, 「NO.30 Clamp Set(09058)」「NO.25 Handle Ring 5mm(09189)」「NO.27 Set Screw(09056)」of 「Chibi Lark Long」can be long clamp style(a mounting width of 90 to 160 mm).
(Chibi Lark Long's clamp is also possible to change the specification).

Each part of our product can be purchased in parts.
Please refer to the parts price list on our website.
Please refer to the parts price list from the "Parts" button at the bottom of each product detail page.

Please also refer to the link page below when ordering parts.
About buy a parts

* The set screws included with the Multi Stand 130 cannot be attached to the Lark clamp base. (Multi stand 130: M6 screw, Lark: M8 screw)
* The color of the "set screw (09056)" is red.
* The handle ring attached to the multi-stand 130 cannot be attached to the Lark clamp. (Multi stand 130: 4mm, Lark: 5mm)
*When attaching the Lark 900's Base to the boat’s edge for The Multi Stand 130, Make sure that the rod stand style is possible.
After that, Please attach the Base on right position.
注意
●此商品不能完全固定钓竿。
请注意钓竿突然脱落。无法保证脱落时钓竿、卷盘等完好无损。
●钓竿支架的耐荷重受到夹钳的安装情况影响。
请不要安装在光滑的表面上。
●夹钳螺丝可能会因振动而变松。请经常确认螺丝是否紧固。
●请不要用立在支架上的钓竿支撑身体。
●从钓竿固定支架改为钓竿角度保持支架时,请松开锁扣后进行更改。如果强行用力的话会损坏支架。
●有些形状的船沿可能无法安装。
●金属部位会因为生锈而导致被固定住,使用后请务必用淡水清洗,擦干水分并擦油后保管。
3D view
用鼠标按住图片并左右移动,可旋转图片。
用鼠标按住图片并左右移动,可旋转图片。

スクロールはこちら
スクロールはこちら
Video Clip
Video Clip
We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.
款号 商品名 价格(不含税) 数量 加入购物车 部件
02042 MULTI STAND 130  ¥5,200(JPY)
  • 送料について
  • ・「代金引き換え」の場合、代引き手数料330円(税込)がかかります。
  • ・3,300円(税込)以上ご購入の場合、送料、代引き手数料が無料となります。
  • 詳しくはコチラ
我们提供EMS和国际e包裹寄送服务。

现在它被拥挤。请从开一会儿之间再次使用。