第一精工は大阪市東成区にある「これがないと釣りができないわけではないがあればスマートな釣具」のメーカーです。

We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.

KACHI KACHI TENSIONER

新商品NEW

Achieved reeling with the desired tension.
Line tensioner that can add up to 8 kg.

*Scheduled for release in April 2024

KACHI KACHI TENSIONER  ¥30,000(JPY)

Achieved reeling with the desired tension.
Line tensioner that can add up to 8 kg.

*Scheduled for release in April 2024

SPEC
● Size: 195×185×165 mm
● Weight: 1230 g
● Max. clamp mounting width: 43 mm
● Compatible PE Line: From No. 3 and up
● Practical tension: Approx. 6 kg; Max. tension: Approx. 8 kg
● Number of ball bearings: 14
● Accessories: Main unit ×1/Clamp ×1/Bolt ×1/Nut ×1/Urethane rubber ring (spare) ×2
● MADE IN JAPAN (Parts: MADE IN CHINA)
Feature 1
Achieved reeling with the desired tension. Equipped with tension display function! (Patent pending)
Feature 2
All seven rollers have two ball bearings each, for a total of 14 ball bearings, ensuring smooth and consistent tension.
Feature 3
Utilizes urethane rubber at the contact point with the line to reduce line slippage and minimize the transfer of friction heat from the drag to the line.

The tension roller adopts a brake structure with four carbon drag washers.
Feature 4
Guards are installed on both the “IN” and “OUT” sides to prevent the line from coming off the rollers during line winding breaks.
The “IN” side guard can be adjusted in multiple directions to align with the spool’s position.
Feature 5
Easily secure the tensioner to tables and more with a clamp that can be adjusted in four directions.
Feature 6
The clamp foot can be removed, allowing for screw attachment to wood and other surfaces (compatible with 6-mm dia. screws).
Usage 1
Secure the tensioner with the clamp to a table or similar surface.
Usage 2
Set the spool with the wound line onto the High-Speed Recycler 2.0 (sold separately, recommended) or a similar device. Thread the line through the “IN” and “OUT” rollers and pull out approximately 1-2 meters of the line from the “OUT” side.
Usage 3
Thread the line through the double rollers, starting from the bottom of the tension roller. If the clamp foot is removed, screw attachment to wood and other surfaces is possible (compatible with 6 mm dia. screws).
Usage 4
After threading the line through the tension roller, proceed to thread it through the slide roller.
Usage 5
Tighten the star drag as evenly as possible and use it according to your desired tension.


If the line and tension roller are slipping, you may improve the situation by slightly loosening the tension on the side that is slipping and tightening the opposite side.
Consumables
The consumables, urethane rubber rings, and carbon drag washers are replaceable, allowing you to use the product for an extended period.

For detailed instructions on purchasing parts, please check here.

"KACHI KACHI TENSIONER" Parts in Detail
Recommended sets
Recommended stronger and quicker settings
[High-Speed, KACHI KACHI, GATCH] Recommended Set Example

High-Speed Recycler 2.0 + KACHI KACHI Tensioner + GATCH REELSHEET
Cautions
● Do not touch the rotating rollers to avoid the risk of injury.
● During use, the product may become hot. Be cautious of burns.
Additionally, resin parts may deform due to heat. Use the product while taking breaks to cool it down from time to time.
● After use, loosen the star drag and store the product only when it has cooled down.
● When attached to a table or similar surface, rubber marks may be left, so please take care.
● The displayed tension value is a rough estimate.
● When you insert the line into the tensioner from a spool where the line has been wound with little or no tension, there are times when the tension may not be applied effectively.
● Coated lines with low friction coefficients may slip and rotate freely on the tension roller. If this happens, you may improve it by slightly loosening the tension on the side that is slipping and tightening the opposite side.
Also, using the High-Speed Recycler 2.0 (sold separately) or a similar device to put tension of about 1 kg on the tensioner while inserting the line can be effective.
● Urethane rubber rings and carbon drag washers are consumables.
Using the urethane rubber ring in a significantly worn condition may damage the line and lead to line breakage. Check the condition of the urethane rubber ring before use.
For detailed information on purchasing parts, visit our website and see the Parts & Repair section.
● To prevent significant damage to the urethane rubber ring, it is recommended to use the line with the tension in kilograms corresponding to approximately 50% to 60% of the line’s number.
3D View
Drag the mouse sideways on the image to rotate the image.
Drag the mouse sideways on the image to rotate the image.

スクロールはこちら
スクロールはこちら
Movie
We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.
Product No Product name Price
(excluding tax)
quantity To shopping cart parts
33336 KACHI KACHI TENSIONER  ¥30,000(JPY)
in preparation
  • 送料について
  • ・「代金引き換え」の場合、代引き手数料330円(税込)がかかります。
  • ・3,300円(税込)以上ご購入の場合、送料、代引き手数料が無料となります。
  • 詳しくはコチラ
Only EMS is available.

Server too busy. Please try again later.