第一精工は大阪市東成区にある「これがないと釣りができないわけではないがあればスマートな釣具」のメーカーです。

We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.

GATCH REELSHEET

新商品NEW

A reel seat for winding that supports the preparation firmly for big fishing, fixing the reel during high-load line winding to reduce the burden.

*Scheduled for release in April 2024

GATCH REELSHEET  ¥14,000(JPY)

A reel seat for winding that supports the preparation firmly for big fishing, fixing the reel during high-load line winding to reduce the burden.

*Scheduled for release in April 2024

SPEC
● Size (when stored): 340×105×110 mm
● Effective clamp mounting width: 15 to 83 mm
● Material: Glass fiber reinforced plastic (main body)/TPS (non-slip cushion cover)
● Accessories: Main body ×1/Non-slip washer cover ×2 (pre-installed)
● MADE IN JAPAN (Parts: MADE IN CHINA)
Feature 1
Firmly secured to tables, etc., with a dual-leg clamp.
Securely fits tables, etc., without damaging them using non-slip washer covers.
For cases where it is acceptable for worktables to get scratched, you can further secure the seat with spikes after removing the covers!

Equipped with a quick bolt function for quick attachment and detachment.
Feature 2
Sturdy with 2-mm-thick pipes and front-end aluminum solid caps.
Feature 3
Stored compactly. At the time of use, the pipe is tightened with two screws to prevent rattling!
Feature 4
The reel seat has a double-nut design to prevent reel loosening to ensure solid handling.
Feature 5
Designed to avoid contact with tables, etc., even with 120-mm-class long handles on jigging reels.
Usage 1
Loosen the two knob screws until they pop out with spring force.
Pull the knob screws and open the cover.
Usage 2
Spread the reel seat, close the cover, and tighten the screws while pushing in the knob screws.
Usage 3
Secure the reel seat firmly to the table, etc., with clamps.
At that time, tighten the clamp screws evenly on both sides.
Usage 4
Secure the reel you are using with two nuts.
When using a large spinning reel, it is recommended to place this product as far away as possible from the tensioner, etc., for greater stability.
Recommended sets
Recommended stronger and quicker settings
[High-Speed, KACHI KACHI, GATCH] Recommended Set Example

High-Speed Recycler 2.0 + KACHI KACHI Tensioner + GATCH REELSHEET
Cautions
● When attached to a table or similar surface, rubber marks may be left
Also, tables, etc., may get scratch damage if attached without the non-slip washer covers. Be cautious.
● Depending on the reel, the reel seat or the foot of the reel may get scratch damage. Consider using commercially available reel foot covers as needed.
● Tighten the clamp screws evenly on both sides.
3D view
Drag the mouse sideways on the image to rotate the image.
Drag the mouse sideways on the image to rotate the image.

スクロールはこちら
スクロールはこちら
Video Clip
We can not accept your order from some countries at present because international post services are stopped due to COVID19 . If you can not choose your country during the order process, it means that the international post services do not accept the parcel to your country at the moment. Thank you for your kind understanding.
Product No Product name Price
(excluding tax)
quantity To shopping cart parts
33337 GATCH REELSHEET  ¥14,000(JPY)
in preparation
  • 送料について
  • ・「代金引き換え」の場合、代引き手数料330円(税込)がかかります。
  • ・3,300円(税込)以上ご購入の場合、送料、代引き手数料が無料となります。
  • 詳しくはコチラ
Only EMS is available.

Server too busy. Please try again later.