Product Search｜Dai-ichi Seiko Co., Ltd.

Search condition：Lark Series

アクセス順表示

画像表示

詳細表示

Lark 300: A maximum mounting width! 225 mm! Ideal for boat fishing in Kyushu, Okinawa, and the Sea of Japan.
A maximum mounting width of as wide as 225 mm, a popular rod holder dedicated to boat fishing off Kyushu, Hokkaido, and the Sea of Japan.
An ideal rod holder for large-sized boats.

Only the rod swings left and right and jerks back and forth, and can be detached with just a single action with fingertips in a timely manner.

Lark 2200: A rod holder provided with a 90°, five-stage swing function dedicated to cruiser and motorboat fishing.
A magic band is set in the rod holder in order to secure the rod at sea.

Swinging left and right and jerking back and forth, and attached or detached with just a single action.
Use the product for a fishing boat where the clamp-type Lark Saouke cannot be mounted.

Hososaokei Adapter Set: Adapter rubber that can secure fine rods with a diameter range of 7 to 25 mm firmly to the Lark Support.
Combined and available for all lark supports (excluding the Smart Support and Ultra Saikyo Support).

* Depending on the Support model, the total length of the adapter will be longer than the Support.
　Cut off the adapter if necessary.

Chibi Lark Super Long: A super-wide version of the Chibi Lark, the smallest and lightest Lark Rod Holder Series, provided with a spare rod holder, plays dual roles with the mounting width increased to 225 mm.
Ideal for boat fishing in Kyushu, Okinawa, and the Sea of Japan.
Either one of the two types of rod holding components can be selected and replaced with ease with a screw according to the target fish and fishing method.
Ensuring excellent stability to withstand left and right twists because the boat side is gripped with the upper and lower non-slip rubber components.

Lark 900: A rod holder dedicated to cruiser and motorboat fishing.

A compact rod holder provided with two types of rod holding components:
1. A rod holding component with a support function that will free the rod with a just a single action to catch middle-sized fish using a compact electrical reel.
2. A rod holding component for short-distant casting to catch small fish using a spinning reel and a compact bait reel.

Shakuri Lark Long: The installation width of the Jerk Lark has been greatly increased to 215 mm. A wide version corresponding to all boats.

Interline rod compatible. A rod holder ensuring ease of fishing and supporting rig casting, jerking, and normal-style fishing simply and in a speedy manner.
The rod (tip) can be turned downward so that the line will be sent out smoothly at the time of casting the rig, which drastically decreases backlashes and makes a rapid fall of the line straightly to the target range (ideal for interline rods).
Possible to keep the rod at the height of the waist for ease of feeding the line to chum casting, thus making it possible to change the user’s posture to normal with the operation of the change lever on the main part.
Of course, it can be mounted vertically or horizontally as desired and is equipped with a 5-stage swing function. A rod holder that makes boat fishing fun.

Lark 2000: A standard-type rod holder dedicated to cruiser and motorboat fishing.
Incorporating a 90° swing function. Possible to secure the rod holder at a position of 45° left and right.

Swinging left and right and jerking back and forth, and attached or detached with just a single action.
Use the product for a fishing boat where the clamp-type Lark Saouke cannot be mounted.
Added with a 90° swing function.
Possible to secure the rod holder at a position of 45° left and right according to the flow of the tide.
This makes it possible to change the direction flexibly to avoid entanglement in narrow places.

Mini Support: Support mounting method
• Secure the support with the support screw to a position where the reel does not come in contact with the rod holder.
• Be sure to set the support so that the attachment/detachment lever will be on the front side. Mounting the lever on the opposite side will result in the falling of the rod.
• Tighten the left and right support screws evenly.
　Keep in mind that the plastic will be deformed if the left and right screws are tightened unevenly.
• The rod may break if the support screws are tightened in excess.

Notes on mounting support
• Press fit the support from above.
　Be sure to press fit the support securely until a crack sound is heard.

One-touch Lark Mini: Incorporating a quick bolt new function. Speeding up the installation on the rod.
Speeding up the installation/removal of the Mini One-touch Support.
Just insert the rod butt of the rod stand at the time of movement to a different fishing point or temporarily standing the rod. The rubber cap eliminates rattling.
Possible to stand the rod easily and in a speedy manner without worries at the time of taking in fish.

The rod holder, clamp, and one-touch support adopt amorphous resin comprised of carbon, glass fiber, and nylon.
A light and durable material that does not rust and is suitable for use in seawater.

Chibi Support: Support mounting method
• Secure the support with the support screw to a position where the reel does not come in contact with the rod holder.
• Be sure to set the support so that the attachment/detachment lever will be on the front side. Mounting the lever on the opposite side will result in the falling of the rod.
• Tighten the left and right support screws evenly.
　Keep in mind that the plastic will be deformed if the left and right screws are tightened unevenly.
• The rod may break if the support screws are tightened in excess.

Notes on mounting support
• Press fit the support from above.
　Be sure to press fit the support securely until a crack sound is heard.